Характеристики

At source captation is the most efficient way to captures the welding fumes.

  • To be connected to autonomous collection units or centralised high suction system
  • The fume extraction can be controlled depending on the actual welding needs by welding current automation. Which helps to reduce noise and power consumption.
  • By using such torches with appropriate welding booms, the torch can be brought to the welder without all the potential user drawbacks. This improves productivity, safety and the lightness of the torch, while allowing fatigue free working in a healthy environment.

The extraction of welding fumes at source provides the assurance of a healthy environment for welders in compliance with regulations and labour laws.

WST 358

  • 350 A @ 100% (C1 gas) Wire : 1.0 - 1.2 mm
  • 50° gun: Ø = 30 mm
  • Diameter of single-section extraction pipe 40 mm

  WST 258 - 4 m WST 278 TA - 4 m WST 358 - 4 m WST 310W - 4 m WST 408W - 4 m
Duty cycle CO2 250 A 270 A 350 A 300 A 400 A
at 100% Ar/CO2 225 A 230 A 310 A 265 A 350 A
Contact tip M6 x 8/10th M8 x 10/10th M8 x 12/10th M8 x 12/10th M8 x 12/10th
Ø nozzle 14 mm 16 mm 16 mm 16 mm 19 mm
Ø torch union 40 mm 40 mm 50 mm 50 mm 50 mm
Extraction performance at torch union 103 m3/h with 15.4 kPa 128 m3/h with 13.3 kPa 132 m3/h with 13.3 kPa 113 m3/h with 13.3 kPa 134 m3/h with 12.4 kPa
Cat. nr W000273343 W000370187 W000273350 W000372898 W000273359
Вернуться к списку